张佳慧 副教授
研究方向
钢结构力学性能与稳定控制
海洋工程钢结构耐腐蚀研究
智能AI赋能钢结构设计优化
钢结构全寿命周期智能运维
联系方式
zhangjh316@163.com
教育背景
2009-06至2014-08 香港大学，结构工程，博士
2006-09至2009-03 同济大学，工程力学，硕士
2000-09至-2004-06 同济大学，工程力学，学士
工作经历
2025-07 至今 上海理工大学，环境与建筑学院，副教授
2014-12 至2025-12 上海理工大学，环境与建筑学院，讲师
2004-07 至 2006-03 同济科学技术有限公司，结构所，助理工程师
主讲课程
《桥梁工程》《塑性力学》《高等钢结构》
主要科研项目
（1）国家自然科学基金青年科学基金项目 《高温下冷弯型钢组合截面轴压构件的失稳机理和设计方法研究》，主持
（2）国家自然科学基金青年科学基金项目 《FRP约束高温（火灾）后混凝土轴压力学性能与破坏机理研究》，主要参与人
（3）国家自然科学基金面上项目,《钢筋混凝土桥墩震后受损继续服役耐久性硏究》，主要参与人
（4）宝钢股份科研项目，“十四五”国家重点专项《海洋建筑结构用耐蚀钢及防护技术》-外协项目《不锈钢复合板承压构件的力学性能研究与优化设计》，主持
（5）香港特别行政区研究资助局资助课题“Investigationof cold-formed steel built-up sections with web and edge stiffeners”，主要参与
（6）国家自然科学基金面上项目“随机杂交互补-松弛动力系统建模、算法及控制研究”，主要参与
代表性论文（第一作者或唯一通讯作者发表论文）
[1]Cao Q, Zhu Y, Zhang J.H.*. Study on the stability and bearing capacity of high-strength steel C-section columns with complex longitudinal stiffeners[J]. Structures. Elsevier, 2026, 86: 111255.
[2]张佳慧*,王佳欣,谭卓琼,葛祖静. 超高强钢薄壁开口截面柱屈曲失稳的试验研究[J].工程力学, 2026, 43(2), 115-124.
[3]Zhang J. H., Zhu Y, Yan B, et al. Corrosion degradation and constitutive modeling of stainless-clad steel plates in marine atmospheres[J]. Structures. Elsevier, 2026, 86: 111474.
[4]Zhu Y, Zhang J.H.*, Yan B, et al. Corrosion resistance and mechanical evolution of austenitic stainless clad plates under chloride exposure[J]. Construction and Building Materials, 2026, 505: 144713.
[5]Zhang J. H., Zhu Y, Cao Q, Hao J, Li H.T. Buckling behaviour and composite action of cold-formed high-strength steel battened columns[J]. Thin-Walled Structures, 2025, 215: 113359.
[6]Zhang J.H., Wang J.X., Xu S.L., Sun X.Y., Wang F.Y. Testing and numerical modelling of web-stiffened cold-formed steel channel section compression members with web perforations and batten reinforcements[J]. Engineering Structures.2025,330: 119836.
[7]Li H.T., Xu C.Y., Zhang J.H.*, Li H.W. Elevated temperature material properties of cold-formed advanced high strength steel channel sections[J]. Journal of Constructional Steel Research, 2025, 226:109183.
[8]Zhang J.H., Li H.W., Zhu Y, Hao Y.M., Li H.T. Post-fire mechanical properties of dual-phase advanced high-strength steel[J]. Thin-Walled Structures,2025,211:113038.
[9]Zhang J.H., Xu S.L., Wang J.X., Yan B, Zhou F. Experimental and finite element analysis of batten-reinforced high-strength steel built-up compression members with web perforations[J]. Thin-Walled Structures.2025,206: 112698.
[10]Zhang J.H., Xu S.L., Wang J.X., Wang F.Y. Test, numerical investigation and design of perforated advanced high-strength steel I-shaped built-up compression members[J]. Engineering Structures, 2024, 314:118246.
[11]Zhang J.H., He J.C., Peng B, Li H.W., Li B.X., Yan B, Zhang J.H.* An experimental investigation for corrosion resistance of stainless clad steel plate[J]. Journal of Constructional Steel Research, 2024, 217:108655.
[12]Xu C.Y., Zhang X.Y., Zhang J.H., Li H.T. Post-fire behavior of double-sided stainless-clad bimetallic steels[J]. Thin-Walled Structures,2024, 203:112128.
[13]Zhang J.H., Wang J.X., Xu S. L., Wang F.Y. Testing, numerical modeling and design of perforated advanced high-strength steel channel section columns[J]. Journal of Constructional Steel Research,2024, 214:108440.
[14]张佳慧,谭卓琼.高强冷弯型钢C形截面短柱畸变屈曲和局部屈曲耦合的试验研究[J].工业建筑, 2023, 53(11):188-195.
[15]张佳慧,孙梦茹.高强冷成型钢开口截面轴压构件的高温后数值仿真与承载力研究[J].建筑钢结构进展, 2021, 23(9).
[16]张佳慧,盛孝耀.双相冷成型钢高温后力学性能试验研究[J].建筑钢结构进展, 2020, 22(5).
[17]张佳慧,葛祖静.冷成型钢开口截面短柱高温后力学性能试验研究[J].工业建筑, 2021, 51(5):99-107.
[18]Zhang J.H., Young B. Experimental investigation of cold-formed steel built-up closed section columns with web stiffeners [J]. Journal of Constructional Steel Research, 2018, 147:380-392.
[19]Zhang J.H., Young B. Finite element analysis and design of cold-formed steel built-up closed section columns with web stiffeners [J]. Thin-Walled Structures, 2018, 131:223-237.
[20]Zhang J.H., Young B. Numerical investigation and design of cold-formed steel built-up open section columns with longitudinal stiffeners[J]. Thin-Walled Structures, 2015,89:178-191.
[21]Zhang J.H., Young B. Compression tests of cold-formed steel I-shaped open sections with edge and web stiffeners[J]. Thin-Walled Structures,2012,52:1-11.
会议论文与学术交流
[1]Zhang Jia-Hui; 13th International Conference on Advances in Steel-Concrete Composite Structures, Session Chair, 13 th International Conference on Advances in Steel-Concrete Composite Structures, 中华人民共和国香港特别行政区, 2024-12-12至2024-12-14 (会议报告)
[2] Zhu yixin; Cao Qiuyi; Zhang Jia-Hui; EXPERIMENTAL INVESTIGATION OF BATTEN REINFORCED ADVANCED HIGH STRENGTH STEEL BUILT-UP CHANNEL SECTIONS WITH WEB STIFFENERS, 13 th International Conference on Advances in Steel-Concrete Composite Structures, 中华人民共和国香港特别行政区,
2024-12-12至2024-12-14 (会议报告)
[3] Cao Qiuyi; Zhang Jia-Hui; Zhu yixin; Experimental investigation of advanced high-strength steel complex stiffened Csection columns, 13 th International Conference on Advances in Steel Concrete Composite Structures,中华人民共和国香港特别行政区, 2024-12-12至2024-12-14 (会议报告)
[4] Zhang Jia-Hui; Ge Zu-Jing; POST-FIRE BEHAVIOR OF COLD-FORMED STEEL STUB COLUMNS WITH LONGITUDINAL STIFFENERS, International Conference on Engineering Research and Practice for Steel Construction 2018 (, 中华人民共和国香港特别行政区, 2018-09-05至2018-09-07 (会议报告)
[5] Zhang Jia-Hui; Young Ben; Compression tests of cold-formed steel built-up closed sections with web stiffeners, 第八届钢与铝结构国际会议, 中华人民共和国香港特别行政区, 2016-12-07至2016-12-09 (会议报告)